Subscribe to our newsletter |+1 503 538 2185
 

Flange Facers, ID Mount

Home > Products > Flange Facers, ID Mount

ID MOUNT FLANGE FACERS

We offer a wide variety of rugged and innovative portable flange facers for 0.75 to 120 inch (19.1 to 3050 mm) diameters, for ID mounting. Several of our machines can be configured for facing, milling or both, and many of our models reface, mill, bevel, square, counterbore, or cut end-prep configurations for welding. For easy setup, smaller units use an integral mandrel to quickly lock into place, while the larger units can be installed with a separate mount or chuck to which the facer body is installed.

With 29 models to choose from, CLIMAX flange facers can tackle an unrivaled range of applications from 0 to 199 inches (0 to 5054 mm) – VIEW BROCHURE.

CONTACT A CLIMAX EXPERT

MODEL BF FLANGE FACER

SPECIFICATIONSINCHMETRIC
Facing Diameter0.75 – 4.12 in.19.1 – 104.6 mm
ID Mounting Diameter0.625 – 2.875 in.15.9 – 73 mm
Feed Rate0.005 in.0.13 mm per pin
Power OptionPneumatic or electricPneumatic or electric
VIEW PRODUCT AVAILABLE FOR RENT

MODEL MSF FLANGE FACER

SPECIFICATIONSINCHMETRIC
Facing Diameter1.25 in. ID – 6.19 in. OD31.8 – 157.2 mm
ID Mounting Diameter1 – 5 in.25.4 – 127 mm
Feed Rate0.005 in.0.13 mm per pin
Power OptionPneumatic or electricPneumatic or electric
VIEW PRODUCT AVAILABLE FOR RENT

MODEL MTF FLANGE FACER

SPECIFICATIONSINCHMETRIC
Facing Diameter3.25 in. ID – 10.63 in. OD82.6 – 270 mm
ID Mounting Diameter2 – 8.5 in.50.8 – 215.9 mm
Feed Rate0.005 in.0.13 mm per pin
Power OptionPneumatic or electricPneumatic or electric
VIEW PRODUCT AVAILABLE FOR RENT

FF3000 FLANGE FACER

SPECIFICATIONSINCHMETRIC
Facing Diameter1.5 – 12 in.38.1 – 304.8 mm
Milling DiameterN/AN/A
ID Mounting Diameter1.5 – 6.75 in.38.1 – 171.5 mm
OD Mounting DiameterN/AN/A
Power OptionPneumaticPneumatic
VIEW PRODUCT AVAILABLE FOR RENT

MODEL MFTF FLANGE FACER

SPECIFICATIONSINCHMETRIC
Facing Diameter4.25 in. ID – 16.25 in. OD19.1 – 412.8 mm
ID Mounting Diameter3 – 13.5 in.76.2 – 343 mm
Feed Rate0.005 in.0.13 mm per pin
Power OptionPneumatic or electricPneumatic or electric
VIEW PRODUCT AVAILABLE FOR RENT

FF4000 FLANGE FACER

SPECIFICATIONSINCHMETRIC
Facing Diameter3 – 19 in.76.2 – 482.6 mm
Milling DiameterN/AN/A
ID Mounting Diameter3 – 12.5 in.76.2 – 317.5 mm
OD Mounting DiameterN/AN/A
Power OptionPneumaticPneumatic
VIEW PRODUCT AVAILABLE FOR RENT

FF5000 FLANGE FACER

SPECIFICATIONSINCHMETRIC
Facing Diameter5 – 24 in.127 – 609.6 mm
Milling DiameterN/AN/A
ID Mounting Diameter5 – 18 in.
88.9 – 457.2 mm
OD Mounting Diameter/strongN/AN/A
OD Mounting Diameter19 inches 482.6 mm
Power OptionPneumaticPneumatic
VIEW PRODUCT AVAILABLE FOR RENT

FF5300 FLANGE FACER

SPECIFICATIONSINCHMETRIC
Facing Diameter5.7 – 40 in.144.8 – 1016 mm
Milling DiameterN/AN/A
ID Mounting Diameter5.7 – 35.8 in.144.8 – 909.3 mm
OD Mounting DiameterID mount onlyID mount only
Minimum Swing Diameter22.75 inches
26.25 inches
577.9 mm
666.8 mm
Power OptionPneumaticPneumatic
VIEW PRODUCT AVAILABLE FOR RENT

FF6300 FLANGE FACER

SPECIFICATIONSINCHMETRIC
ID Facing Diameter11.8 – 60 in.299.7 – 1524.0 mm
Milling DiameterN/AN/A
ID Mounting Diameter11.8 – 57.5 in.299.7 – 1460.5 mm
OD Facing Diameter8.5 – 60 inches215.9 – 1524.0 mm
OD Mounting Diameter38.1 – 63.8 inches967.7 – 1620.5 mm
Power OptionPneumatic or HydraulicPneumatic or Hydraulic
VIEW PRODUCT AVAILABLE FOR RENT

FF7200 FLANGE FACER

SPECIFICATIONSINCHMETRIC
Facing Diameter30 – 72 in.762 – 1828.8 mm
Milling Diameter35 – 72 in.889 – 1828.8 mm
ID Mounting Diameter30 – 72 in.762 – 1828.8 mm
OD Mounting DiameterN/AN/A
Power OptionPneumatic or HydraulicPneumatic or Hydraulic
VIEW PRODUCT AVAILABLE FOR RENT

FF8200 FLANGE FACER

SPECIFICATIONSINCHMETRIC
Facing Diameter45 – 120 in.1143 – 3048 mm
Milling Diameter45 – 120 in.1143 – 3048 mm
ID Mounting Diameter45 – 120 in.1143 – 3048 mm
OD Mounting Diameter89.8 – 136.4 inches2280.9 – 3464.6 mm
Power OptionPneumatic or HydraulicPneumatic or Hydraulic
VIEW PRODUCT AVAILABLE FOR RENT