Flanschendrehmaschinen, Außenaufspannung
Mit verschiedenen Modellen von Flanschendrehmaschinen für Außenaufspannung zum Planschleifen, Fräsen, Anfasen, Winkelbearbeiten, Gegenbohren oder Schnittpunktvorbereitungen zum Schweißen bietet CLIMAX eine große Auswahl an robusten und innovativen transportablen Flanschendrehmaschinen für Durchmesser von 0 bis 3050 mm (0 bis 120″). Mehrere unserer Maschinen können zum Planen, zum Fräsen oder für beides konfiguriert werden! Zur Erleichterung der Einrichtung können größere Einheiten mit einer separaten Halterung oder einem Spannfutter installiert werden, an dem das Gehäuse der Flanschendrehmaschine montiert wird.
| SPECIFICATIONS | INCH | METRIC | |||
| Facing Diameter | 0 – 12 in. | 0 – 304.8 mm | |||
| Feed Rate | 0 – 0.035 in./rev | 0 – 0.889 mm/rev | |||
| OD Mounting Diameter | 2 – 12 in. | 50.8 – 304.8 mm | |||
| Power Option | Pneumatic | Pneumatic |
| SPECIFICATIONS | INCH | METRIC | |||
| Facing Diameter | 0 – 12.5 in. | 0 – 317.5 mm | |||
| Feed Rate | 0 – 0.035 in./rev | 0 – 0.889 mm/rev | |||
| OD Mounting Diameter | 2 – 14.1 in. | 50.8 – 358.1 mm | |||
| Power Option | Pneumatic | Pneumatic |
| SPECIFICATIONS | INCH | METRIC | |||
| Facing Diameter | 0 – 24.5 in. | 0 – 622.3 mm | |||
| Feed Rate | 0 – 0.035 in./rev | 0 – 0.889 mm/rev | |||
| OD Mounting Diameter | 8 – 26 in. | 203.2 – 660.4 mm | |||
| Power Option | Pneumatic | Pneumatic |
| SPECIFICATIONS | INCH | METRIC | |||
| Facing Diameter | 0 – 36.5 in. | 0 – 927.1 mm | |||
| Feed Rate | 0 – 0.035 in./rev | 0 – 0.889 mm/rev | |||
| OD Mounting Diameter | 20 – 38 in. | 508 – 965.2 mm | |||
| Power Option | Pneumatic | Pneumatic |
| SPECIFICATIONS | INCH | METRIC | |||
| Facing Diameter | 8.5 – 60 in. | 215.9 – 1524.0 mm | |||
| Milling Diameter | N/A | N/A | |||
| ID Mounting Diameter | 11.8 – 57.5 inches | 299.7 – 1460.5 mm | |||
| OD Facing Diameter | 8.5 – 60 inches | 215.9 – 1524.0 mm | |||
| OD Mounting Diameter | 38.1 – 63.8 in. | 967.7 – 1620.5 mm | |||
| Power Option | Pneumatic or Hydraulic | Pneumatic or Hydraulic |
| SPECIFICATIONS | INCH | METRIC | |||
| Facing Diameter | 0 – 120.5 in. | 0 – 3061 mm | |||
| Milling Diameter | N/A | N/A | |||
| OD Mounting Range | 9.2 – 120.5 in. | 234 – 3061 mm | |||
| Power Option | Pneumatic | Pneumatic |
| SPECIFICATIONS | INCH | METRIC | |||
| Facing Diameter | 45 – 120 in. | 1143 – 3048 mm | |||
| Milling Diameter | 45 – 120 in. | 1143 – 3048 mm | |||
| ID Mounting Diameter | 45 – 120 inches | 1143 – 3048 mm | |||
| OD Mounting Diameter | 89.8 – 136.4 in. | 2280.9 – 3464.6 mm | |||
| Power Option | Pneumatic or Hydraulic | Pneumatic or Hydraulic |