The CLIMAX KM4000 Key Mill is a compact, rugged, and high-performance milling solution engineered for efficient field and shop machining. Designed to machine extra-wide keyways, slots, and stress-relief pockets directly on the shaft, its powerful drive system and 2″ / 50.8 mm sideshift reduce tooling changes, setup time, and downtime. The KM4000 mounts anywhere along the shaft and operates at any angle, accommodating shaft diameters from 4–24″ / 101.6–609.6 mm while delivering smooth, precise performance in demanding industrial applications.
KM4000 Key Mill
Mobile Nav
| OPERATING RANGES | SPECIFICATION |
| Slide travel, longitudinal | 7.88″ / 200.2 mm |
| Slide travel, transversal | 2.0″ / 50.8 mm |
| Vertical travel max. | 3.0″ / 76.2 mm |
| Variable spindle speed (no load) | 180–530 rpm |
| Spindle hole diameter | Inch: 0.75″ / 19.1 mm Metric: 0.79″ / 20 mm |
| Maximum end mill diameter | 1.25″ / 31.75 mm |
| Maximum shaft diameter (standard bar clamp) | 18″ / 457.2 mm |
| Maximum shaft diameter (optional chain clamp) | 24″ / 609.6 mm |
| Minimum shaft diameter (standard bar clamp) | 8″ / 203.2 mm |
| Minimum shaft diameter (optional shim kit) | 4″ / 101.6 mm |
| Minimum clamping space on stub shaft | 8″ / 203.2 mm |
| Minimum clamping space on obstructed shaft (NOTE: The KM4000 can cut keyways within 2.2″ / 55.88 mm of the obstruction) | 10.5″ / 266.7 mm |
| Standard tooling | End mill: Ø 3/4″ / Ø 19.1 mm |
| POWER OPTIONS | OUTPUT |
| Electric | 120V or 230V, 50/60 Hz |
| MEASUREMENTS | SPECIFICATION |
| Overall length | 18.5″ / 469.9 mm |
| Overall width | 14.0″ / 355.6 mm |
| Overall height | 13.25″ / 336.6 mm |
| Base size | 9.0 × 18.5″ / 228.6 × 469.9 mm |
| Operating weight | 195 lb / 89 kg |
| Shipping weight | 250 lb / 114 kg |
| Shipping dimensions | 24 × 24 × 19″ / 610 × 610 × 483 mm |
Compact mounting: Requires just 8.5″ / 215.9 mm of shaft for mounting, or 10.5″ / 266.7 mm when clamping next to an obstruction, with the flexibility to mount anywhere along shafts from 4–24″ / 101.6–609.6 mm in diameter.
Powerful cutting performance: Universal motor and triple gear reduction provide high torque for efficient machining of keyways, slots, and pockets.
Large machining capacity: Cuts keyways up to 3.25″ / 82.6 mm wide and 7.88″ / 200.2 mm long in a single setup, with 2″ / 50.8 mm of lateral travel for machining wide pockets and slots.
Self-centering alignment: Self-aligning contoured base automatically centers on the shaft for fast setup and accurate keyway machining.
Precision feed control: Precision-machined dovetail ways, an Acme-thread leadscrew with roller thrust bearings, and a zeroing adjustment dial provide smooth travel and accurate depth-of-cut control.
Reliable operation: Permanently sealed lubrication and anti-friction bearings ensure smooth, dependable performance in any operating orientation.
Faster setup: Rapid longitudinal travel can be achieved using a drill motor to reduce setup time.
Consistent cutting performance: Soft-start motor maintains cutting speed under load for smooth, reliable machining.
Global compliance: CE and CSA certified for safe operation and worldwide use.
Additional power options and custom configurations are available upon request to meet specific application requirements.
LITERATURE
OPERATING MANUAL

Related Products


